Large Quantity Generator Hazardous Waste Workshop presentations from April 18, 2013:
Hazardous Waste Identification [PDF - 52 MB]
Large Quantity Generator Requirements [PDF - 18 MB]
Land Disposal Restrictions [PDF - 1.5 MB]
Used Oil and Used Oil Filter Requirements [PDF - 44 MB]
Universal Waste Requirements [PDF - 7.9 MB]
What is a Hazardous Waste?
The definition of a hazardous waste starts with the definition of a solid waste. A solid waste is any solid, liquid or contained gaseous material that is discarded by being; disposed of, incinerated, or recycled. A solid wastes can also be the by-product of a manufacturing process, a commercial product that is used in a business or home, garbage, etc.
A hazardous waste is a solid waste which because of its quantity, concentration, physical, chemical, or infectious characteristics may:
(i) cause, or significantly contribute to an increase in mortality or an increase in serious illness; or
(ii) pose a substantial hazard to human health or the environment when improperly treated, stored, transported, or disposed of, or otherwise managed.
Hazardous waste are divided into two categories:
a) Listed waste
A solid waste is a hazardous waste if it appears on one of four lists published in the Code of Federal Regulations (40 CFR 261). These hazardous waste are called listed hazardous waste.
b) Characteristic wastes
A solid waste that is not a hazardous waste may still be a characteristic hazardous waste. There are four properties used to classify a characteristic hazardous waste:
The hazardous waste universe is divided into two categories. The first category is those individuals or companies that generate hazardous waste. This category is regulated by the Compliance Section of the hazardous waste program. The second category is those facilities that manage the hazardous waste generated by others. This category is regulated by the Permitting Section of the Hazardous waste Program.
The management of hazardous waste generated by others requires a specific authorization (permit) from the State of Florida. The issuance of a permit requires review of information about the location of the facility, the type of activities conducted at the facility (i.e. storage in tanks, containers, treatment or incineration), operational practices at the facility, and the closure plans.
The permitting section is also responsible for reviewing applications for Mercury Recovery and Reclamation Facilities, and Used Oil Processors. It should be noted that Used Oil by its nature is not a hazardous waste, but improper management practices could cause it to become a hazardous waste.
The Department uses a permit application tracking system to monitor the permit process.
Compliance inspections are conducted at all generators, transporters, treatment, storage, and disposal facilities to determine their compliance with Federal and State regulations.
Inspections are our main source of information. Legal enforcement is taken for violations detected during inspections. The main purpose of enforcement actions is to ensure that the facilities return to compliance. This return to compliance may involve doing remediation to soil and groundwater to remove contaminates which have been released due to operations at these facilities.
In addition to our compliance and enforcement activities, technical assistance is provided to the public, facility owners, consultants and law enforcement officials. This assistance is disseminated in various ways, such as; answering compliance question on the phone, forwarding documents of various hazardous waste issues, giving public seminars to various segments of the regulated community, and giving both specific and general presentation before school groups and civic organizations.
Data Bases used:
Hazardous Waste Compliance & Enforcement Tracking - CHAZ
Compliance and Enforcement Tracking (Other Programs) - COMET,
Legal Case Tracking System - LCT
Florida Division of Corporations (Lookup) - SS
Last updated: April 19, 2013
D.E.P. Southwest District - TAMPA
13051 N. Telecom Parkway Temple Terrace, Fl. 33637 Phone: 813-632-7600 Fax: 813-632-7665
Contact Southwest District